646089 - Exhaust Manifold Heat Riser Repair Kit

Exhaust Manifold Heat Riser Repair Kit For 41-53 Jeep & Willys Vehicles with 4-134L Engine

646089 - Exhaust Manifold Heat Riser Repair Kit

Comes with new shaft, bushings, washer, and coil spring. Acted as an early way of warming up your motor in cold conditions. Opens flap as motor warms.

Call Mike @Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).

New Exhaust Manifold Heat Riser Repair Kit – Part#: 646089

Q: Do they make a heat riser kit for a 54 226 truck?

  • A: Yes, we can get this good used. Please call us toll free.

Q: Having problems removing old bushings, do they need to be drilled out or punched out? Any certain way does it all go back?

  • A: You can typically punch them out.

Q: Do you carry the flapper that goes inside of the manifold? Does it come with the repair kit?

  • A: We can get it good used. Please call us toll free.

Q: The butterfly on my M38 is square, will this heat riser work for my Jeep?

  • A: Yes this is the correct heat riser repair kit for you M38 as well.

Q: How do you know if the heat riser is working? Will you see a physical movement?

  • A: Yes, it will open the flap up. You will see the counter weight move.

Q: I can hear the flapper very loudly in my 46′ CJ-2A when the motor is running. Does that mean it is broken, or damaged and need to be replaced?

  • A: It should be spring loaded. Make sure the spring is still there and under tension.

Q: Do you have instructions for adjusting an exhaust Manifold Heat riser kit?

  • A: There really is no adjusting it per se. The spring just needs to go over the tab to spring load it.

Q: How is the flapper attached to the rod? The one I removed appeared to be welded.

  • A: Some were welded some were held in with 2 small flat head screws.

Q: Do you have the flapper that fits on the shaft that goes inside of the manifold and also the retainer tab for the heat spring? How much do these cost? I have the heat spring, counter weight, and heat shield.

  • A: The flapper is available good used only. Please call us toll free. We are happy to help.

*Manuals : Mechanics ManualsOwners ManualsMaster Parts Lists

*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.

Get ConnectedStay InspiredBuild Your Willys.

If you are looking for, Willys Jeep Brake Parts and Accessories or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!

0 thoughts on “Willys Jeep Parts Q&A: Exhaust Manifold Heat Riser Repair Kit”
  1. Hi Mike: on the willys ’45 mb, the heat riser bimetal washer,- does the dimple face the spring or the counter weight ? mine was facing the spring.

  2. Hi Mike: on the willys ’45 mb, the heat riser bimetal washer,- does the dimple face the spring or the counter weight ? mine was facing the spring.

Leave a Reply

Your email address will not be published. Required fields are marked *