Find out how to install your Clutch Pressure Plate on your Flywheel for your Willys Jeep CJ-2A in this latest installment in the Kaiser Willys Parts Installation video series.
Note: The Flywheel surface must be clean of any oil or grease using an appropriate cleaner.
For help with this or any other 1941-1971 Willys Jeep installation, visit KaiserWillys.com, call our parts counter at: Toll Free 1-888-648-4923, Monday-Friday from 9-5pm EST or email mike@kaiserwillys.com.
Specific parts that might be covered in this video in part include:
635394 – Flywheel
930731 – Clutch Friction Disc (used in video)
746240 – Clutch Friction Disc
921977 – Clutch Friction Disc
928553 – Clutch Friction Disc
994841 – Clutch Friction Disc
930733 – Clutch Alignment Tool (used in video)
930734 – Clutch Alignment Tool
When installing the disc there is a front and back side to the disc. If you put it in backwards it will drag when you try to use it. That happened to me.
When installing the disc there is a front and back side to the disc. If you put it in backwards it will drag when you try to use it. That happened to me.
Hi David,
Thanks for the comment! In the video, Jason mentions that there is a flat side and protruding side. You want the protruding side to go towards the rear of the vehicle so that the flat side is going towards the flywheel. Let us know if you have any other questions and we will be happy to help!
Hi David,
Thanks for the comment! In the video, Jason mentions that there is a flat side and protruding side. You want the protruding side to go towards the rear of the vehicle so that the flat side is going towards the flywheel. Let us know if you have any other questions and we will be happy to help!