Accelerator (Gas) Pedal For 52-66 CJ-3B, 5, M38A1

Comes complete with hinge and pin included!!!

Call Mike@Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).

New Accelerator Pedal – Part#: 805546

Q: Will this fit a 1966 Jeep CJ-5A Tuxedo Park Mark IV, vin 8322139263? Having hard time matching up pedal cause all that is there is a bent rod arm.

• A: As long as you have a 4 cylinder motor Yes. The V6-225 set up is different.

Q: Does this come with the control rod?

• A: This is the accelerator pedal and first linkage rod.

Q: Do you have the linkage from the end of the first linkage rod to the carburetor. If not where do I get that or do I have to fabricate it?? Any suggestions on how to make this connection would be appreciated. For a 1956 CJ-5.

• A: We can probably get you good used. Please call us toll free.

Q: Did the 6-225 engine CJ-5s use this style pedal?

• A: It is different. Please call us toll free. We are more than happy to help out.

Q: Do you sell a SPRING for the Accelerator Pedal for a 1960 CJ5 with the F134 engine with all original linkage?

• A: We should have them. Please call us toll free. We can probably help.

Q: Do you sell just the nut that is pictured on the end of the first linkage rod? It fits into the bellcrank and has a cotter pin securing it. It is part number 8329759.

• A: We can probably get that good used by itself if you like.

Q: I have a 59 CJ-3B with a Buick v-6. What gas pedal can I use?

• A: You could probably modify them to fit with the unoriginal motor.

Q: Will this pedal fit a 1967 CJ-5 with the 134 engine?

• A: Yes as long as you have the 4-134 head engine you are all set.

Q: I need an accelerator pedal for a 71 CJ-5.

• A: If you have the 4-134 engine it is the same one. If you have the V6-225 engine we can get those good used.

Q: Does this come with the bracket that screws to the floor mine is snapped in half?

• A: Yes this will have the lower bracket as well.

Q: Will this spring fit a 1967 Kaiser Jeep CJ-5 with the F-134 engine?

• A: Yes as long as you have the 4-134 F head engine you are all set.

Q: Will this fit a 1959 CJ-5? If not what stock number would I need to look for.

• A: Yes that is listed above. It will be correct for your vehicle.

Q: Will this fit an 1962 FC150 (4 cylinder)?

• A: They are different but I’m sure it could be made to work.

Q: Installed a 289 v8 in a 55 Willys CJ-5. Do you have a gas pedal and linkage setup that I can use?

• A: This would be the closest thing. You would have to modify from there given your set up.

*Manuals : Mechanics Manuals, Owners Manuals, Master Parts Lists

*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.

Get Connected. Stay Inspired. Build Your Willys.

If you are looking for, Willys Jeep Fuel Parts and Accessories, or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!