Retractable Font Seat Belt with Hardware For 41-75 Jeep

BELT-2 - Retractable Front Seat Belt with Hardware

New Replacement Retractable Front Seat Belt for one person. Lap Belt Only. All necessary hardened hardware included for installation in your Willys Jeep vehicle.

Call Mike@Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).

parts_banner_opt

New Retractable Front Seat Belt – Part#: BELT-2

Q: Will this work for the ’48 Jeepster? CHP tells me I must have seat belts to drive on the street.

  • A: Yes, they should work fine for you.

Q: Will this work for a 1955 Willys P/U Truck?

  • A: Yes it should work ok.

Q: Will this belt work with a 58 Willys Wagon?

  • A: Yes it should work just fine.

Q: Will this bolt right up to the existing seatbelt loop on my 1965 Universal? Or does this require me to drill the body and mount?

  • A: Typically in 1965 they never had belts but you should be able to use the existing hole with no problem.

Q: What color is the seat belt-2 and can I get it in red?

  • A: These are only available in black.

Q: Will this lap belt work with the rear seat in a ’64 or ’65 CJ5, or do you have one that will?

  • A: Yes this will work just fine. Or part number: BELT-1

Q: I am ready to install two of these on my 48 CJ-2A. Any recommendations on where to install the bolts?

  • A: To either side of the seat allowing room for it to retract and fit comfortably and proper when buckled.

Q: I have a 1975 US Postal Jeep. Will this work?

  • A: Yes this should work for that application as well.

Q: Will this seat belt work on a 1971 Jeepster Commando? 

  • A: Yes, these will work for the Commando as well.

Q: Does this come with installation instructions?

  • A: No, there are no install instructions – but if you have questions call us toll free and we can help. Its pretty straight forward.

Q: I have a 1965 CJ-5, what belts are recommended for front and back?

  • A: If you have a roll bar I would get BELT-3 for the front seats. If not either BELT-1 or BELT-2 are great.

Q: Will these work for a 1970 Jeepster Commando?

  • A: Yes, these should work. BELT-1 would work as well.

*Manuals : Mechanics ManualsOwners ManualsMaster Parts Lists

*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.

Get ConnectedStay InspiredBuild Your Willys.

If you are looking for, Willys Jeep Body Parts and Accessories or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!

3 thoughts on “Willys Jeep Parts Q&A: Retractable Front Seat Belt”
  1. It would probably be more helpful to list the models that this won’t work on. I would definitely be interested to know that.

  2. I am interested in buying the seat belts for my 56 Willys CJ5.

    Can you advise where to mount them to the floor in this vehicle? Particularly on the driver’s side.

    Tks,

    C

Leave a Reply

Your email address will not be published. Required fields are marked *