Complete Master Brake Kit 11″ For 46-64 Willys Truck
Note: Picture for reference only
Replace your over turned, bent, worn out, greasy brakes today and get the whole thing done at once. Comes complete with:
New Brake Drums (front and rear)
New Wheel Cylinders (front and rear)
New Master Cylinder
New Brake Shoes (front and rear)
New Upper Return Springs (front and rear)
New Lower Return Springs (front and rear
Call Mike@Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).
New Complete Master Brake Kit 11″ – Part#: BRAKE4WD
Q: Will I need new back plates to put this on a CJ-3A and will my stock wheels still fit?
- A: Your stock rims should work fine. Yes you will need new backing plates to run 11″ brakes on a CJ-3A.
Q: Brake overhaul kits. 1959 CJ5, measured across the brake shoes = 11. Have they have been swapped out at one time or another? The 11 inch kit indicates 46-64 truck, not the CJ-5. I’ve already order the seals, etc. will they work?
- A: You don’t measure brakes across the shoes. Always measure the inside diameter of the brake drum itself (machined surface to machined surface). Please email us pictures of your brakes and we can ID for you what you have on there.
Q: Can you guys set me up for rear overhaul only?
- A: Sure. Please call us toll free. We can work it up for you.
Q: I have a 1953 M38a1 but it has 11 in drums on the inside so I don’t know if they are differant axles but the overhaul kit should work if they are 11 in right?
- A: Someone put unoriginal brakes on your vehicle. Please call us toll free. We can help you ID what you have get you the right parts.
Q: Is this a direct bolt on kit that would replace the 9 drums on a 1947 CJ-2A to the larger 11 drums?
- A: You will need different brake backing plates for a CJ-2A. Please call me toll free.
Q: Will this kit work on a 1952 M38A1?
- A: Yes you can convert over with backing plates.
Q: Will this kit work to convert my 9 brakes to 11 on my 43 MB?
- A: Yes it will work just fine if you get TR/SW brake backing plates.
Q: My Willys Truck is a 1960 model, built in Australia, could you confirm that this break kit would be the correct one. It is right hand drive with Tornado 230 engine.
- A: Yes it will be the correct one for you.
Q: Do you offer any 55 4wd Truck brake overhaul kits without the master cylinder included? I have installed pedals & master cylinder from a chevy p/u don’t need the master cylinder.
- A: Sure. Please call me toll free. I’m more than happy to help out on this.
Q: Do you offer any brake kits without the mastercylinder For 55 Willys Pickup?
- A: Sure. Please call me toll free.
Q: Is the BRAKE4WD overhaul kit available with the dual master cylinder?
- A: Sure. Please call us toll free. Thanks!
*Manuals : Mechanics Manuals, Owners Manuals, Master Parts Lists
*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.
Get Connected. Stay Inspired. Build Your Willys.
If you are looking for, Willys Jeep Brake Parts and Accessories, or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!
What are tr/sw backing plates?