Brake & Clutch Pedal Cross Shaft For 41-71 MB, GPW, 2A, 3A, 3B, 5, M38, M38A1
Direct replacement for your worn out, egg shaped cross shaft in your Willys Jeep restoration project. Tube that both the clutch and brake pedal arms attach to.
Call Mike@Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).
New Replacement Brake & Clutch Pedal Cross Shaft – Part#: A495
Q: The pivot balls that the brake & clutch cross-shaft pivot on each end are worn out. Can they be replaced and what should I order?
- A: Please call us toll free. We are more than happy to help out.
Q: When replacing this cross shaft are there extra parts I should order to replace with it? (Washers,pins,ect…) for my 48 CJ-2A serial #218265.
Q: My cross shaft has a raised bar on the outside of the frame. Is there a similar notch in the frame this bar slides in to remove it?
- A: Please call us toll free. I can probably help.
Q: I have 1957 FC-170 226ci, I need a #913013 cross clutch assembly. Cross shaft connects to clutch release shaft using a square headed clevis pin # 915506. can you help?
- A: We may have good used for your FC170. Please call us toll free.
Q: Does this piece have the keyway cut for clutch arm mount?
- A: Yes that is correct. It has the cut out.
Q: Will this part work for the Pickup or is there another part for it?
- A: For the Willys Truck it is different. That is available good used. Please call us toll free.
Q: Will this fit a 1971 V6 CJ-5, or is it a different part?
- A: The V6-225 engine used a different one. We can only get those good used.
Q: I have a CJ-2A 1946 Jeep Willys. When I hit the break there is a lot of play from left to right what do I need to fix that?
- A: This cross shaft as well as a new brake pedal arm will do the trick.
*Manuals : Mechanics Manuals, Owners Manuals, Master Parts Lists
*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.
Get Connected. Stay Inspired. Build Your Willys.
If you are looking for, Willys Jeep Brake Parts and Kits, or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!
Dear Sir,
Regarding the clutch brake crossover shaft. After a while the bearing surface will wear sloppy and if you can find it some of the utility wagons had a bolted on bearing block, or a ’41 willys had a bushed block that sold be bolted on the frame also. these will make a better than average replacement part.
sincerely,
Dave