Steering Drag Link Assembly For 48-66 CJ-2A, 3A, 3B, 5
Replaces your worn out drag link in your Willys CJ-2A, CJ-3A, CJ-3B, and CJ-5. Attaches from your steering pitman arm to the steering bellcrank. For later style bellcrank where ball bends up.
Call Mike@Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).
Steering Drag Link Assembly (1 required per vehicle) – Part#: 646619
Q: Do you sell a drag link assembly for 1947 CJ-2A prior to serial number 199079?
- A: I can get good used. Please call me toll free.
Q: Does the drag link assembly come with all hardware?
- A: Yes, that is correct.
Q: What is the length?
- A: 25″ just like original.
Q: Do I need kit 923418 cups plugs ect? Or is the drag link complete with cups and plugs dust shields?
- A: Yes it comes with them all complete.
Q: Does it fit in a 1951 Willys M38?
- A: Yes it should work for the M38 as well.
Q: I have a 48 CJ-2A before serial # 199079 and need a steering drag link.
- A: We have a repair kit part number: 923418
Q: Looking for a Steering Drag Like Assembly for a ’67 Jeepster Commando. It has manual steering. Do you have such a part or know where we can find one?
- A: Please call us toll free. We can possibly get you good used for that vehicle.
Q: Will this fit a 6-226 Willys Wagon?
- A: They are different for the Willys Station Wagon. We can get those good used only.
Q: On a 66 CJ5, when removing and installing the drag link onto the pitman arm ball, do you disassemble the ends or do they press on and off?
- A: You need to screw the end caps off with a big phillips head screw driver.
Q: What end goes towards the front? The one with the hole closer to the end or the one with the hole farther from the end?
- A: They only go in one way to line up with both the steering bellcrank and pitman arm. Call us if you still have questions. Thanks.
Q: Will this drag link fit a 1959 FC150?
- A: These are only for the vehicles listed above. We do sell repair kit that would work for the FC part number: 923418
Q: What size of grease fiting do I use? It looks like a 1/4 inch fitting but what is the thread count?
- A: Yes I believe its a 1/4″ fine.
Q: Do you carry the drag link for a 59 Willys Wagon I see you carry the internal rebuild kit.
- A: We do have a rebuild kit part number: 923418A for the Willys Station Wagon. Please call us toll free and we can quote you out shipping rates.
*Manuals : Mechanics Manuals, Owners Manuals, Master Parts Lists
*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.
Get Connected. Stay Inspired. Build Your Willys.
If you are looking for, Willys Jeep Steering Parts and Accessories, or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!