Rebuilt Long Block Engine for Jeep & Willys with 4-134 L Engine (Gear Driven)
These 4-134 L head chain driven motors are rebuilt here in the USA.
SHIPS TRUCK FREIGHT FOR FREE.
Features: Thoroughly cleaned and hot tanked. The head, all hardware and sheet metal components (timing cover, etc.) are media blasted. The block and head have been checked for cracks (magnafluxed and pressure tested). Hardened seats have been installed on exhaust valves. Valves have been re-machined or replaced, depending on the condition of the original, and all valve springs have been replaced. The camshaft is an original (re-machined), or has been replaced with new. Lifters have been re-machined or replaced.
The block is bored oversize only enough to clean taper (to preserve as much material as possible). Final honing on the block is done with plateau hone to create the absolute best finish possible with an automatic cylinder hone (Sunnen). The deck surface of the block has been checked and re-machined (if necessary). A wet stone grinder is used to produce the best finish possible. The surface of the head is also checked and re-machined (always) with a wet stone grinder. The crankshaft has been re-machined, and the block line bore has been checked and re-machined (if necessary). Connecting rods are checked for out-of-round and re-machined. The final assembly is done in a climate-controlled, clean assembly room, free of dirt and debris.
After final assembly, the oil system is pressurized with 40 lbs. and the engine is rotated to ensure that the engine is primed properly. Finally, the engine is smoke-tested (while slowly rotating by hand) to verify that there are no gasket leaks prior to shipping.
Top quality, name brand parts are used for everything inside our engines, including the following:
Gaskets – Fel Pro
Oil Pump – Melling
Camshaft – NOS or Melling
Valve Springs – SB International (SBi)
Valves – SB International
Pistons – Sealed Power (Federal Mogul)
Rings – Hastings, Moly
Rod Bearings – Clevite 77
Main Bearings – Clevite 77
Cam Bearing – Durabond
Timing Components – PBM/Erson
Our engines come with an Industry Best 3-Year Unlimited Mileage Warranty. Should there be any warranty claims, a contact phone number is provided on the warranty card shipped with the engine. This covers workmanship and parts, but does not cover things such as overheating due to a bad radiator, etc.
NOTE: A core is required which we need to pick up within 10 days of receipt of the engine. It needs to be on a strapped down on a palate for pickup. We will cover the cost for the pickup of your old core. Sold less flywheel. For any questions about this part, call us Toll Free: 1-888-648-4923.
Call Mike @Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).
Rebuilt Long Block 4-134 L Engine – Part#: 4134LMOTOR
Q: I own a M38A1 and am wondering if this option will be available soon for 413-4 F engines? It would be super to have this offer for a new engine for an M38A1 that could just be dropped in. Thanks.
- A: Yes we have these too at the same price. Please call me toll free. We can help.
Q: I have a CJ-2A that has a front mount plate that both mount angles face to the rear. Which type mount plate do these engines have? I know the later model front mount plates has one mount angle (ear) facing forward and one facing aft.
- A: We can usually get it either way.
Q: Do you have any plans in the future of selling a rebuilt 6-226? Thanks
- A: We sell complete engine overhaul kits. Part number: 226L is the way to go.
Q: Is the engine prepared for todays gasoline?
- A: Yes that is correct. They use stainless inserts and valves.
Q: I just found out that my 4-134 F head engine cannot be rebuild, due to a crack on top of block near the piston hole #2 right below head stud. Please let me know if you offer the hurricane 4-134 F head. 1951 Truck it’s a 473. I see you advertised the L engine and not the F head 4-134.
- A: Yes we do offer the F head engine. Please call us toll free. It is the same price as the 4-134 L.
Q: How much horse power does it have? Friends are talking about installing 4 cyclinder cummings diesel motots for more power. Will tranny and transfer case work, or, would they have to be replaced? I AM KEEPING WHAT I HAVE. FRIENDS ARE ASKING THE QUESTIONS.
- A: The 4-134 engine are also called 463 engines. Which stands for 4 cylinder 63 horse power.
*Manuals : Mechanics Manuals, Owners Manuals, Master Parts Lists
*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.
Get Connected. Stay Inspired. Build Your Willys.
If you are looking for, Willys Jeep New Products, or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!
Buen día, primero que todo no hablo ingles disculpen, tengo un m38a1 que estoy restaurando peto el motor no sirve si manejan para ese es un motor 1964 m38a1
do you still offer a rebuilt long block gear driven cam ?
T I A
Dave Diauto
Hi Raymond,
Please give Mike M a call toll free at 1-888-648-4923 Mon-Fri 9AM-5PM EST or email mike@kaiserwillys.com and he will be happy to help!
I need an engine for my 1948 willys jeep it has an L134 timing chain I need a price I just spent $ 1800.00 to find out my block is bad, after rebuilding it. Help me
Hi John,
We have new 4-134 L blocks available with no core required. Please give us a call toll free 1-888-648-4923 Mon-Fri 9AM-5PM EST or email mike@kaiserwillys.com and the guys will be happy to help! Have a great day!
I have a CJ3a with a 134 F head installed. it needs an oh ( burning lots of oil) i want to put a 134 L head in it.
will you take the 134 F head i have as a core return, and i get a 134 L head long block?
Hi Dennis, we sell parts for the Dauntless but not complete engines. Give Mike at Kaiser Willys Auto Supply a call Toll Free: 1-888-648-4923 Mon-Fri 9AM-5PM and he will be more than happy to help you with this. Have a great day!
I have a v6 motot in my 66 cj5 do you have this eng avalible 225 buick/dauntless v6? At what price includ shippment cost to zip 02343 thanks Dennis.