Parking Light Socket (Less Wire) Fits: 46-53 Willys CJ-2A, CJ-3A
Direct replacement for your parking light. Plugs directly into your early style recessed grill to accept your parking light bulb. Exact reproductions of the originals and a sure fit for your Willys CJ-2A or CJ-3A restoration project.
Call Mike @Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).
New Replacement Parking Light Socket (2 required per vehicle) – Part#: 641609
Q: What size of wire is recommended?
- A: I believe 6 gauge.
Q: Do you sell the wire that has the bulb connector on them, what part # are they?
- A: This is just a local pickup. Try NAPA for the wires.
Q: Do u have parking light socket for a 1949 Willys Truck with 6 Volt?
- A: Try part number: 641609A
Q: Do you have these in a kit: bezel, lens, gasket, socket, and bulb?
- A: They are sold separately.
Q: What bulb does this take?
- A: If you are running 12 volts the proper bulb is part number: 454645
Q: Does this include the little spring inside and the wire “tip” that together provide tension to the connector on the rear of the bulb? If not, where can the spring and tip be found?
- A: Yes that is in there too.
Q: Do you sell the socket and the cup where it sits in, to suit the 2 1/4″ lens and bezel? 1962 Truck.
- A: The socket just plugs directly into the hole in the grill. Like original.
Q: I have a 1946 CJ-2A. The grill has a slight depression for flush mounting parking lights rather than recessed. What are the exact parts I would need to install new parking lights into this for both turn signal and parking lights?
*Manuals : Mechanics Manuals, Owners Manuals, Master Parts Lists
*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.
Get Connected. Stay Inspired. Build Your Willys.
If you are looking for, Willys Jeep Electrical Parts and Accessories, or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!