Distributor Rebuild Kit For 41-71 CJ-2A, 3A, 3B, 5
Comes complete with cap, points, rotor, and condenser. Ready for install!!! For Autolite IAD4008 and IAD4041 distributors. Cap diameter measures 3-5/16″. Please match numbers off Distributor I.D. plate to ensure correct kit. Should be three letters followed by four numbers.
Call Mike@Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).
New Distributor Rebuild Kit – Part#: IAD4008
Q: What are the gap setting for points and spark plugs for ’42 Willys Jeep?
- A: They are .020 for both.
Q: Are the contact luggs on the Distributor Caps where the wires plug in, made of Aluminum or Brass?
- A: Aluminium
Q: I am restoring a 1951 M38 military jeep 24 volt. Has anyone found or used a electronic ignition point set. Would like to keep it 24 volt.
- A: I don’t believe at this time there is a 24 volt solid state kit available.
Q: What is the correct setting for points and plugs for CJ-2A?
- A: .020 for both
Q: Is this 6 volt?
- A: They are for either 6 or 12 volt.
Q: What is the gap setting for the points?
- A: .020
Q: I can’t find the ID plate on my distributor, on a 1964 CJ-5. I’m trying to order a tune-up kit. Any advice?
- A: There should be a metal tag on the distributor. Sometimes they can be hard to see.
Q: I’m from Chile and I wonder if the distributor kit for CJ2A Willys is 12 volts or if the kit is 6 and 12 volts at the same time . ( Points, Rotor, PAC, Condenser)
- A: The distributors work on either voltage.
*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.