Side Step Kit with Bracket for Both Sides for 46-71 CJ-2A, 3A, 3B, 5, M38, M38A1
If you need a step up into your old Willys, this kit is all you need. Comes complete for both sides. Mounts at a side angle for easy entry and stamped step for sure muddy foot grip!
Note: Minor modification required on some models
Call Mike @Kaiserwillys.com for details at TOLL FREE 1-888-648-4923 (Mon-Fri, 9AM-5PM EST).
New Steel Side Step Kit Complete with Brackets and Hardware. – Part#: 646150K
Q: Do you have instructions for the installation?
- A: Please call me toll free. I’m more than happy to help out. It is fairly simple installation.
Q: Do you have item #646150kc to fit a CJ-2A 1945 jeep willys?
- A: Yes, this will fit, but you may have to shorten up the brackets for install.
Q: Just purchased the steps and confused as to where the vertical mountings bolt to the body. Under the gas tank on the drivers side?? Are there any photos from the bottom-up showing the installation details? Need some help for I hate to take the seat and tank out now that I have a finished product, less the steps! The passenger side will be less complicated, unless I am going down the wrong path.
- A: Please call us toll free. I can help you out on this and walk you thru the installation.
Q: Will these steps fit a 1974 CJ-5?
- A: Yes they should work fine.
Q: Will these steps fit a ’59 FC150 ?
- A: I’m sure it would with modification.
*Manuals : Mechanics Manuals, Owners Manuals, Master Parts Lists
*EMAIL or call Mike Toll Free (1-888-648-4923) Mon-Fri, 9am-5pm EST if you have any questions about this part or restoring your Willys.
Get Connected. Stay Inspired. Build Your Willys.
If you are looking for, Willys Jeep Body Parts & Accessories, or Willys Jeep Restoration Parts and much more for your 1941-1971 Willys vehicle, you have come to the right place!
Hi Colin,
Each step will angle towards the rear of vehicle. The 3 studs go across the holes. When you enter your Jeep you usually come from rear so step is angled towards you. If you have any other questions please give Mike a call toll free at 1-888-648-4923 Mon-Fri 9AM-5PM EST or email mike@kaiserwillys.com and he will be happy to help!
Hi, having just bought a set of side steps for CJ2A mounting why does the middle support bracket have 5 holes offset. The bolts on the underneath of the side step are not offset. Q? How is the middle support supposed to bolt on to the underneath of the side step?
Hi Howard, We do have a photo of the step on a CJ-3A (side view of the entire body) but it doesn’t show a close up of the actual hardware installed, etc… If I can help you further, feel free to email me at webmaster@kaiserwillys.com! Thanks, Rachel H.
Hi, I’d call you for your walk through instructions but I can’t hear on the phone. Do you at least have a picture of the step installed on a cj3? Thanks Howard